Cisco Meraki Configuration

Upon ordering our service, you will be given some specific information to populate the fields in your specific Meraki dashboard.

The following instructions outline how to setup a Cisco Meraki for the JustClickWIFi Platform. Additional Cisco options may need to be enabled before you’re able to configure completely.

  1. In Cisco Meraki Dashboard, navigate to Wireless > Configure > Access Control.
  2. Select the SSID currently configured to use RADIUS with a sign-on Splash Page.
  3. Select ‘Open (No encryption)’
  4. Choose ‘Sign-on with ‘my RADIUS server’
  5. Add the following server information for RADIUS for Splash Page:
    Host 1: 52.23.46.139
    Port: 1812
    Secret: Use the Hotspot RADIUS Secret that is in the JustClickWiFi Dashboard for this Hotspot (We will supply this to you)
    Host 2: 52.207.192.243
    Port: 1812
    Secret: Use the Hotspot RADIUS Secret that is in the JustClickWiFi Dashboard for this Hotspot (We will supply this to you)

  6. Use the pull-down to select ‘RADIUS accounting is enabled’
  7. Add the following server information for RADIUS accounting:
    Host 1: 52.23.46.139
    Port: 1813
    Secret:  (We will supply this to you)
    Host 2: 52.23.46.139
    Port: 1813
    Secret: (We will supply this to you)

    NOTE: If you do NOT see this menu option then you will need to open a case with Meraki support and ask them to enable this feature for you. Simply ask, “Please enable RADIUS Accounting for this network.”